LOAD CONTROLLER ONBOARD AIR COMPRESSOR

Air Lift's Load Controller Onboard Air Compressors are designed specifically to inflate our Air Lift Air Springs for heavy towing/load applications, and also are a great source for compressed air on the go for camping, cycling and other outdoor activities. Each kit comes complete with 12-volt compressor, gauge dash panel with inflate and deflate controls, all electrical connections, air lines, fittings, and detailed, illustrated installation manual.

LOAD CONTROLLER I
Systems are designed for heavy and/or frequent users, which includes all motor home rear applications. Load Controller I offers twice the flow of our light duty compressor system (Load Controller II) meaning that the bags fill in half the time! Offered in both dual and single gauge systems:

Dual Gauge
Systems are recommended for all motorhome rear kits, heavy pickup campers and contractor vehicles where bias loads and frequent use is common.

Fully independent to allow for individual changes to help correct body roll and rock. Individual controls allow for separate pressures in the left and right air springs, letting you level the vehicle side-to-side in the rear. Corrections for as much as 3"-4" can be made from side-to-side in order to level the vehicle. This is particularly helpful when leveling your RV on a campsite. Air adjustability right from the dash of your vehicle, up to 100 p.s.i. for maximum roll stability. Improved handling and cornering on rough uneven roads, sharp curves, high and cross winds, and lane changes.

One year limited warranty.

Single Gauge
Systems are recommended for all heavy duty and frequent use applications and centered loads. Common applications for the single gauge systems are: towing heavy horse trailers, towing race car trailers, and contractor vehicles.

Single gauge for even filling and exhausting of both air bags. Air adjustability right from the dash of your vehicle, up to 100 p.s.i. for maximum roll stability.

One year limited warranty.

LOAD CONTROLLER II
Systems are economically priced for less demanding applications, such as the occasional and light duty haulers and towers. To assist in kit longevity, a Low Pressure Sensor is included in the Load Controller II kits to assure that minimum unloaded pressure is maintained at all times, with or without a load. Offered in both dual and single gauge systems:

Dual Gauge
Systems are recommended for all pickups with campers, and full size vans. This would also be a good selection on any vehicle when a left/right leveling correction is desired for light vehicles with part time use or only occasional adjustment is required like weekend camping.

Fully independent to allow for individual changes to help correct body roll and rock. Individual controls allow for separate pressures in the left and right air springs, letting you level the vehicle side-to-side in the rear. Corrections for as much as 3"-4" can be made from side-to-side in order to level the vehicle. This is particularly helpful when leveling an off-center load. Air adjustability right from the dash of your vehicle, up to 100 p.s.i. for maximum roll stability. Improved handling and cornering on rough uneven roads, sharp curves, high and cross winds, and lane changes.

Two year limited warranty

Single Gauge
Systems are recommended for all passenger cars, SUVs, mini vans, and most pickup truck applications when the load is centered and only occasional use is required.

Single Gauge Load Controller II Single gauge for even filling and exhausting of both air bags. Air adjustability right from the dash of your vehicle, up to 100 p.s.i. for maximum roll stability.

Two year limited warranty.